PRODUCT INFORMATION

Category: Stainless Metallizing Wire
Alloy: WWMetallizing Stainless Wire #1
Class: No #1
Description:
Stainless Metallizing Wire #1 can be sprayed with most metalizing guns, using only fuel gas. Use #1 wherever a corrosion and wear resistant stainless steel is required. Applications include shafts, value plugs, hydraulic rams. Since it is a high-shrink material, use grooves for coatings more than .030” thick, wherever there are edges. Parameters for spraying can be obtained from Spraying Instruction Manuals. Coatings may be machined or ground. Respiratory protection is recommended for spraying this material.
Chemical Composition

C0.08 max
P0.03 max
S0.03 max
Mn2.0 max
Ni8.0 max
Cr18.0 max
Si.075 max
FeBalance