PRODUCT INFORMATION Category: Stainless Metallizing Wire Alloy: WWMetallizing Stainless Wire #2 Class: No #2 Description: Stainless Metallizing Wire #2 can be sprayed with most metalizing guns using any fuel gas. Use #2 wherever a hard coating is required, even where corrosion resistance is not necessary. It is high strength, high elongation and low shrink. Use on cylinder liners, pistons, valve stems, rams or crankshaft bearings. Parameters for spraying can be obtained from Spraying Instruction Manuals. Coatings may be machined or ground. Respiratory protection is recommended for spraying this material. Chemical Composition C 0.35 max P 0.02 max S 0.02 max Mn 0.35 max Ni 0.50 max Cr 13.0 max Si 0.50 max Fe Balance