PRODUCT INFORMATION Category: Flux Cored Stainless Electrodes Alloy: WW316HT-1 Class: E316HX-X Description: Electrodes of this classification usually are used for welding similar alloys. These electrodes have been used successfully in applications involving special alloys for high-temperature service. Carbon content is the high range 0.04 to 0.08% as compared to E316LT-X. Following the chemical composition designation comes the letter “T” which signifies that the product is a flux cored electrode or rod. Following the “T” is a “1” or “0” indicating the recommended position of welding. The “1” or “0” following the “T” designates the following: “0” – designed to weld in the flat or horizontal position, “1” – designed to weld in all position. Following the position indicator and a dash, are the numerals “1”, “3”, “4”, “5”, or the letter “G”. The numerals “1”, “4”, and “5” identify the shielding gas required for classification of the electrode. The number “3” signifies that an external shielding gas is not employed. The letter “G” signifies that the shielding medium, chemical composition and mechanical properties are not specified. Chemical Composition C 0.08 max Cr 17.0-20.0 Ni 11.0-14.0 Mo 2.0-3.0 Mn 0.5-2.5 Si 1.0 max P 0.04 max S 0.03 max Cu 0.50 max